Trustpilot
Pro-Kleen Hot Tub System Flush 1/5L
You may also like
Product information
The Pro-Kleen Hot Tub System Flush effectively breaks down and powers through dirt and grime build up in your hot tub or whirlpool pipes.
Is your hot tub / whirlpool in need of a complete system flush? Bacteria, body oils, skin cells, dirt and grime enter your hot tub water via various sources and create a breeding ground for undesirable and potentially harmful bacteria which in turn promotes an unhealthy bathing environment.
Available in:
- 5 litre bottles
Multi-pack discounts available, the more bottles you buy the bigger the saving.
Bacteria needs somewhere safe to multiply and your hot tub or whirlpool's internal system is the perfect place. The bacteria create a protective slime layer called bio-film allowing them to firmly stick inside the pipe-work.
This concentrated formula will safely yet effectively break down and power through body fats, dirt and grime. It contains a powerful bactericide agent which kills and sterilises the internal system. By cleaning and flushing inside the pipes regularly the internal system will soon be grime free.
Directions of use:
- For hot tubs and whirlpools, simply fill with water to the top of the jets
- Add 500ml of solution per 1000L of water and run for 15 to 30 minutes
- Use System Flush at every water change for hot tubs and every 3 months for whirlpools
Please always read the label and follow the instructions carefully.
Reviews
Powered by
Chris Hampson
Aaaaaaaaaaaa
13 Aug 2022
Mr John Green
Works really well, and a great price
16 Feb 2022
Peter Iles
Does what it says on the container.
1 May 2021
Thomas Paterson
More cost effective than other brands
29 Mar 2021
Stephen
A good product
3 Mar 2021
Mr Stanley Winfield
Seems to do what it says on the bottle
16 Feb 2021
Mr Colin Masson
Does exactly what’s stated, fresh and clean afterwards
27 Sep 2020
Zena Harrison
Excellent product the water was pristine condition and crystal clear after hot tub system flush
16 Aug 2020
evans199
Really impressed, followed the instructions for dosage and running the pumps and when drained the tub was squeaky clean. On refilling, the fresh water was crystal clear, cleaner in fact than when we first filled it.
27 Aug 2019
R Stone
Nice produt
8 Aug 2019
Frequently asked questions
What temperature should the water be when you run the system flush? Is 30 degrees considered warm enough for should I heat it up even more?
Cold water can be used but warm water would be more effective. 30 degrees is warm enough.
Hi. I’m about to use this cleaner in my inflatable lazy spa. Could you confirm please. I have the water about the jets and heated. Pour in the product. Let it circulate with the filter out. ? Is that correct please? Also do I run the bubbles as well? Thank you for your help!!!
Yes, fill with cold water to the top of the jets. Add the solution and run for 15 to 30 minutes.
Your Question: Hi. I’m about to use this cleaner in my inflatable lazy spa. Could you confirm please. I have the water about the jets and heated. Pour in the product. Let it circulate with the filter out. ? Is that correct please? Also do I run the bubbles as well? Thank you for your help!!!
I did ask this question yesterday but in the response you didn’t say wether to run the bubbles or not? Please help. Thank you!
Please fill to above the jets with cold water and add the solution and run 15 to 30 minutes. Please follow the label instruction.
Hi we have a Swim Spa with 4500ltrs of water how much will we need for cleaning the pipework and jets
Simply fill with water to the top of the jets add 2.5l of solution and run for 15 to 30 minutes and then drain your swim spa.
Can I use my prokleen hottub complete system flush in my washing machine
We would recommend using the Washing Machine Descaler & Cleaner
https://www.hygienesuppliesdirect.com/pro-kleen-washing-machine-cleaner-descaler
https://www.hygienesuppliesdirect.com/pro-kleen-washing-machine-cleaner-descaler
Hi Sorry I don’t think I have been putting in enough flush, 1800L hot tub and 500ml of flush, am I right in thinking this should be 3L of flush
Please fill with water to the top of the jets add 1L of solution to your Hot Tub and run for 15 to 30 minutes.
Hi,I'm using this to clean my lazy spa tub, the inlet pipe is around 200 to 250ltrs of water, how much should I put in? I've seen it states 500ml but surely that is to much for a small inflatable hot tub?
Please follow the instruction label and add 500ml product with 300L water, 1L product with 600L water. The Jets will need to be covered and run for 15 to 30 minutes. This is used to clean the pipework on your Hot Tub.
Hi, I’ve flush my 1000litre tub as per instructions. I’m going to leave tub empty for two months or so, is it ok to leave what’s left behind ‘in the internal pipes’ until i refill?i will flush out first before refilling. Thankyou.
Yes, but remember to flush out before refilling again.
Is the product only for use when you are emptying and refilling the tub? Can it be used when the hot tub is still in use?
This needs to be emptied and rinsed before your Hot Tub can be used again.
I have a cleverspa hot tub that I've just taken out of storage after the winter. I want to clean out the system and pipes. I'm going to use the pro-kleen hot tub and whirlpool complete system flush to do this. So I'll put some water into the hot tub to the top of the jets add 500 ml of solution to the water . The controls that I've got on the hot tub are filter and bubble. Which should I run for 30 mins? What does close the air controls mean please?
The Jets are usually not on the portable hot tubs. Please just run your system as per label instructions.
When emptying the water from tub after using this product can it just go onto grass or down the drain? Does the waste water need to be disposed of in any particular way?
It is usually down the drain but it can be emptied onto grass after the treatment is completed.
Is this product harmful to the environment (or toxic to aquatic life)? I don’t have mains drainage and I live by a river, so I’m looking for a flush that would be safe.
It is not harmful to the environment but please follow the label instructions.
After draining do I need to fill up and drain it all out again to clear any solution in the pipes or is just a tub rinse good enough ?
Use every water change every 3 months then empty.
After using flush for 15/30min i have drained my hottub. After filling back up and turning jets on i can still smell flush and see some scum appearing ontop of the water is this safe to get in or do I have to drain again?
Please just skim off the scum. Then it is ready to use.
Hi. Needing to change my hot tub water and clear out using the system flush. Can I put it in the old water now? Let it run, drain, clean then re fill?
Or does it have to be drained first, fresh water, then put the cleaner in then drain again?
Thanks
Yes just add the solution 500ml of solution per 1000L to the old water and run for 15 to 30 minutes. Use for every water change and every 3 months for whirlpools.
Can I use the pipe flush & the hottub spa & whirlpool cleaner at the same time, or use one, drain down fill again use the other then flush again?
Yes, but rinse between uses.
Hi would it be okay to add the flush and leave it overnight?
Please apply the solution as per instructions 500ml of solution per 1000L but make sure water covers the jets. Then run the jets for 15-30 minutes. You must remember to completely drain the water before using the hot tub again.
I’m going to put this in my existing water and flush, once you rinsed and drained will there still be pro kleen present in the lazy spa pipes? Or do you need to fill put the bubbles on and empty again to make sure you’ve got rid of all the flush?
Use System Flush at every water change for hot tubs and every 3 months for whirlpools.
Hi can I use this to clean out the jets on my spa bath? and is is suitable for discharge into a septic tank?, as i do not have mains drains.
Yes, it can be used in your spa bath please follow the label instructions. It can discharge into your septic tank only if it does NOT contain enzymes.
Will the pro Kleen hot tub complete system flush kill white mould?
No, but we would recommend using the Pro-Kleen Algae Remover would eliminate white mould
https://www.hygienesuppliesdirect.com/products/prod250201-pro-kleen-spa-range-5-litre-algaecide?brand=pro-kleen
https://www.hygienesuppliesdirect.com/products/prod250201-pro-kleen-spa-range-5-litre-algaecide?brand=pro-kleen
Do you have to remove the filter before putting ProKleen Hot Tub & Spa complete system flush?
Yes, I would advise you to remove the filter.
Does ProKleen Hot Tub & Spa Complete System Flush kill Hot Tub Folliculitis
Sorry but this has not been tested so I can not advise if it does or does not.
My research on line suggest to leave a system flush cleaner in the hot tub for upto 12hours. Your product says 15-30mins - is there any harm done if i leave it in the hot tub longer?
I would advise to use it for 15 - 30 mins with the jets and if you would like to leave it in for 12 hours turn off the jets.
before draining I advise you turn the jets back on for another 15 - 30 mins so it can go to the surface.
before draining I advise you turn the jets back on for another 15 - 30 mins so it can go to the surface.
Do you have to flush the pro Kleen flush out or can you just refill after emptying the hot tub?
Please empty your hot tub & rinse with clean water.
Iv used your flush in my tub left it in for 12 hrs and used the jes every hour running for half hour iv now emptied and refilled the tub put in my chemicals is it safe to use if there was any flush left in pipes ?
After the System Flush is used empty your hot tub and rinse it out with clean water before using your hot tub again.
Hi, my hot tub is currently empty but want to do a system flush as has been empty for some time. Can I use the cleaner after filling with cold water or do I need to heat water to temperature first and then use?
Thanks
Zoe
Cold water can be used but warm water would be more effective.
What’s the difference between this product and the ‘hot tub spa and whirlpool cleaner’ I have both products. Why would I use one over the other?
SYstem Flush is more for flushing through pipework, whereas Hot Tub, Spa and Whirlpool Cleaner is more for deep cleaning inside whirlpool systems, jets etc.
I want to replace the "old" water in my hot tub, and clean it with System Flush before refilling. The hot tub is full and the water has Bromine in it, do I need to empty and refill with clean water before using System Flush and then empty and refill again after, or can I just use it in the normal water with chemicals in it before draining?
You can use it in your water before draining.
Can I use this with an inflatable hot tub that has a built in heater/filter
Thanks
Yes.
Hi just to summarise, If the hot tub is to be packed away for winter and currently has "used" water in there with chlorine and other lazy spa chemicals. Before draining the old water , could i add Pro Kleen Flush for 15 mins. Then drain the water and rinse the empty tub with fresh water and dry the tub and pack it up? Also doing so will I still need the Pro Kleen Surface cleaner aswell? Or is the flush doing the same? Thank you
Yes, you could flush the tub then drain and pack it up. The surface cleaner is more for your hot tub shell, whereas the flush is more for cleaning out the inner workings of your tub.
Can you get in the hot tub with the pro kleen still in it
No.
Does this product kill legionaries bacteria?
This contains a bactericide agent for sterilisation but has not been tested against legionella.
If I use cold water to flush my hot tub through, how long would you recommend I flush for? With warm water the flush time is around 30 mins so is an hour enough when using cold water? Thanks
If using cold water the flush time is around 40 minutes.
Hi - I’m running pro Pro Kleen system flush through now with jet open and operating on full power - I’m confused with the pack instructions which says close the air controls?? But all online demos have the jet open and on full - could u advise pls
Just to the confirm the label is correct. Please open the jets and operate at full power but turn the air off.
Good morning, im pretty sure you have answered this question but i just want to clarify.
im going to use the system flush, can i put it straight into the existing water then drain it and rinse, is this correct, regards phil
The solution needs to cover the jets for then run for around 15 to 30 minutes before rinsing out the solution.
Hi there im confused how do I close the air off but turn the jets on ?
Please check the manufacturer of your Hot Tub on how to open the jets and close the air off.
Hi. I have a Canadian Spa Swift Current V2, which doesn't have an option to close off the air to the jets (just 3 "speed" settings). Also the pump can only do one thing at a time, i.e. filter or jets. Could you advise how to use this product on this tub please? I want to make sure the jet pipes get cleaned as well as filtration pipes/plumbing etc. Thanks
Please use on the lowest speed setting and check with the manufacturer of the Canadian Spa Swift for additional advice.
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.
| Email: | |
| Phone: | |
| Question: | |
| Business name: | |
Secure Shopping
