Pro-Kleen Microfibre Cloth and Wash Mitt Kit - 5 cloths, 2 gloves
You may also like
Product information
Incredible Value
If you get through a lot of washcloths, these microfibre cloths and mitts offer an unmissable bargain! Each kit comes with five cloths and two mitts at an amazingly low price – and buying multiple kits nets you an even bigger saving.
Premium 1000GSM Microfibre Cloths
Our microfibre cloths are made of soft, ultra-absorbent 1000GSM fabric. This means they’re great for contact washing your car or using as buffing and polishing cloths.
Expertly-Designed Wash Mitts
The fronds on our wash mitts are specially designed to lift dirt away from your car instead of dragging it across your paintwork. This means you get a streak-free shine every time you wash your car!
Suitable for Any Surface
You can use your cloths and mitts on any surface, including car interiors, kitchen worktops, TV and computer screens, mirrors, and more! They’re designed to attract dust and pull it away from any surface, leaving it looking brand new once again.
Review by Keith Gribbin - Precious Metal Vehicle Detailing
Pro-Kleen Super Thick Microfibre Cloth. Grey and Yellow. 40cm X 40cm.
The first thing that struck me when I received this item was that it arrived in a sealed plastic bag. This meant that the item was packaged at the factory, and was presented in a “clinically clean” condition. The cloth itself had not been subject to outside contamination, and would not present any concerns at being used to buff over a high sheen bodywork direct from the packet. This is a key issue when detailing at such a high level. The key to success is to keep all cloths as clean as possible. If they become contaminated with dust, grit, grease or the like, then it’s time to put them to one side and use a new or newly prepared cloth (Machine washed and repackaged to prevent contamination). This way, you are not presenting an abrasive material back to the vehicles bodywork and are therefore preventing any excess paint finish damage.
The cloth weighs in at a luxurious 172g when dry, and is a thick, deep pile 1000GSM material. It is ultra-soft and is the ideal product for polishing the car bodywork, glass, or even soft vinyl and leather. It will actually hold a liquid content over five times its own weight without dripping! I tested this using a digital cooking scale. The item has incredible absorbency and is a useful piece of kit for replacing an expensive wash leather that cannot be cleaned so easily. This is important as it means it’ll pull dirt away from your car bodywork rather than simply dragging it across, giving you a gleaming spotless finish when cleaning or buffing. It is extremely versatile and can be used wet or dry for different cleaning jobs.
The cloth can be simply placed in a washing machine and dried off for use, next time around, making this item an invaluable and very cost-effective wash leather replacement when it comes to vehicle detailing. Keep it in a self-sealed plastic bag to prevent any contamination before use. You can keep one in the door pocket of a car to wipe interior glass condensation, or just have it on hand for spills.
Pro-Kleen Microfibre Wash Mitt. Blue 24cm x 18cm
This item is also factory sealed in its own plastic wrapper which again prevents any contamination before use. It is a vibrant blue colour that clearly shows any dirt or debris collected whilst in use. The many luxurious “fingers” of microfibre more than quadruple the surface area of absorbency which means that you can cover a greater area in a single go when cleaning the car bodywork, making the job quicker and easier.
Once one side is dirty, you can turn the mitt around on the hand so you have a second clean surface to continue cleaning with. It is also of a very soft fabric which is gentle on the vehicles bodywork but effective enough to absorb the dirt. The mitt should be cleaned off in a second bucket of warm water before re-application of a car wash product and used again to continue the car cleaning process (this removes any contamination/dirt/grit/grease etc from the mitt allowing it to be reloaded with clean soapy water to tackle the next bodywork panel). As you wear your mitt like a glove, it will naturally follow the contours of whatever is being washed, such as wing mirrors, door handles and alloy wheels, for example. This is a big advantage over a sponge which only washes where it touches.
The mitt measures 24x18cm and has a heavy-duty elasticated wrist band to stop it from slipping from the hand when submerged in water. It weighs 94g when dry and can hold six times its own weight in water. The quality of the stitching can clearly be seen inside the mitt, which means it’s not going to fall apart even when soaked. If you take care to clean it during and after use, it should offer a long lifespan, again making this product an invaluable and cost-effective solution that everyone should have in their arsenal of car care products.
Simply place the item in the washing machine to thoroughly clean, dry off and place in a self-seal plastic bag ready for use next time around.
Reviews
Frequently asked questions
There are no Frequently Asked Questions for this product.
Perhaps you would like to be first to
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.
Email: | |
Phone: | |
Question: | |
Business name: | |