A Highly Efficient Water-Pumping Solution

Our water pump uses a highly efficient motor to move massive quantities of water while only using 400W power. It has a maximum flow rate of up to 8,000L, meaning it can deal with large volumes of water very quickly.

Designed for Dirty Floodwater

This submersible pump can handle particles of up to 35mm in size, so you can use it to safely drain dirty floodwater. It won’t be affected by bits of dirt, sand, leaves, and other debris that can be present in floodwater.

Perfect for Draining Pools

While the pump is designed for use with dirty water, it’s perfectly fine to use in clean water, too. This means you can take advantage of its incredible flow rate to drain your pool or hot tub!

Simple to Use

The pump is activated by a simple float switch. This powers the pump on automatically when it’s submerged in water, and powers it off when the water is drained. If you’re dealing with dirty water, this means you won’t have to wade in to start pumping it away.

Safe at Depths of Up to 7m

Each pump is tested to an IPX8 waterproof rating and is safe to use at depths of up to 7m. When you combine this with the long 10m power cord, this means it’s suitable for even very deep water. You can also use it in shallow water, as it has a minimum operating depth of just 11.5cm.

Includes Optional Flat Hose

Each pump can be purchased with a flat hose, so you’ll get everything you need to use your pump right out of the box. We have a choice of 5m, 10m, 15m, 20m and 25m hoses available – make your selection using the drop-down above.

What’s in the Box?

1 x 400W submersible water pump with float switch

1 x elbow pipe

1 x pipe reducer

1 x flat hose (optional, 10m and 25m available)